1" SoundControl Ceiling Suspended Acoustic Panel 2ft by 4ft

1" SoundControl Ceiling Suspended Acoustic Panel 2ft × 4ft | 610 × 1220mm | NRC 0.75 | Class C

The Advanced Acoustics 1" SoundControl Ceiling Suspended Acoustic Panel is a fabric-wrapped acoustic panel designed to hang from the ceiling on steel wire rope, suspending the panel below the ceiling surface. The suspended format treats reverberation from both faces of the panel simultaneously, increasing the effective absorption per panel relative to a surface-mounted installation of the same size. The panel consists of a 31mm Class '0' open-cell acoustic foam core wrapped in an open-weave polyester fabric, mounted on a rigid backing board with suspension fixings for wire rope hanging. The fabric wrap is available in 31 colours.

The 2ft × 4ft (610 × 1220mm) format provides 0.74m² of panel face area — the largest format in the 1" SoundControl suspended range. The large format maximises absorption per panel and per suspension point, making it the most efficient 1" suspended specification for achieving large coverage areas with fewer panels. The 1" thickness achieves NRC 0.75 (Sound Absorption Class C); the suspended format increases effective absorption by exposing both panel faces to the room.

Applications

• High-ceiling spaces where surface fixing is impractical. Suspended panels are the appropriate specification for spaces with high, vaulted, or structurally complex ceilings where direct surface fixing is not feasible. Wire rope suspension allows panels to be hung at an appropriate height within the room, bringing acoustic absorption closer to the occupied zone where it is most effective.
• Open-plan offices — reverberation and echo control. Suspended panels treat reverberation from both faces simultaneously. The 2ft × 4ft format is suited to row arrangements along the length of larger open-plan spaces, providing maximum coverage per suspension point and minimising the total number of panels and ceiling fixing points required.
• Meeting rooms and boardrooms. Suspended panels above a meeting table or conference area provide targeted absorption directly over the primary speech zone. The 2ft × 4ft format is suited to larger meeting rooms and boardrooms where the ceiling area can accommodate the longer panel dimension, reducing the number of panels required to treat the space.
• Spaces with exposed structural ceilings. In spaces with exposed concrete, steel, or timber structural ceilings, surface-mounted fixing may not be appropriate. Wire rope suspension from structural elements allows panels to be installed without surface fixing, providing acoustic absorption in spaces where a surface-mounted installation would not be possible.
• Educational environments — classrooms and lecture spaces. The 2ft × 4ft format is suited to row arrangements across the ceiling of larger classrooms and lecture theatres, providing maximum coverage per suspension point and reducing the total number of panels and ceiling fixing points required.

Product Benefits

• NRC 0.75 — effective mid and high frequency absorption. The 1" (31mm) foam core achieves NRC 0.75 (Sound Absorption Class C), with strong absorption from 500Hz upward: 0.65 at 500Hz, 0.94 at 1000Hz, 1.13 at 2000Hz, and 0.99 at 4000Hz. The suspended format exposes both panel faces to the room, increasing effective absorption relative to a surface-mounted installation. Low-frequency absorption is more limited (0.30 at 250Hz); where low-frequency control is also required, the 2" SoundControl Ceiling Suspended panel is the appropriate specification.
• Class '0' fire-rated foam core — compliant for commercial use. The acoustic foam core is Class '0' rated to BS 476 Parts 6 and 7, and C s1, d0 to EN 13501-1, meeting commercial fire safety requirements for suspended acoustic treatment in offices, schools, and public buildings.
• Open-weave polyester fabric wrap — 31 colour options. The open-weave polyester fabric allows sound to pass through to the foam core without significant attenuation, maintaining full acoustic performance across the entire colour range. Available in 31 colours — download the swatch card for the full range.
• Wire rope suspension — compatible with Advanced Acoustics suspension components. Designed for use with the Advanced Acoustics 1.5mm steel wire rope and loop clamp suspension components, available separately. Wire rope suspension allows panel height to be adjusted during installation and provides a clean, minimal fixing detail.
• 2ft × 4ft format — maximum coverage per suspension point. At 0.74m² per panel face, the 2ft × 4ft is the largest format in the 1" SoundControl suspended range, providing the greatest absorption coverage per suspension point and the most efficient specification for large ceiling areas.
• Handmade in the UK — consistent quality across every panel. All SoundControl panels are handmade in the Advanced Acoustics UK facility using consistent materials and construction methods, ensuring uniform acoustic performance and finish quality across every panel in an installation.

Please note: All SoundControl panels are made to order with a 2–3 week lead time. Suspension components (wire rope and loop clamps) are available separately.

Installation

Determine the desired suspension height and cut the wire rope to the appropriate length, allowing for the loop clamp fixing at the ceiling and the panel attachment point. Ensure ceiling fixing points are located on solid ceiling structure or appropriate noggins — do not fix into plasterboard alone without appropriate cavity fixings. Check for concealed services (electrical cables, pipework) before drilling into the ceiling. Due to the panel size, two people are recommended for installation.

Thread the wire rope through the loop clamp and fix the clamp to the ceiling at the marked position. Attach the wire rope to the panel suspension fixing point and adjust the panel height as required before securing the wire rope in position.

For grid installations, use a chalk line or laser level to ensure consistent alignment and equal spacing between panels. Set out all suspension points before installing any panels to ensure the grid is correctly laid out.

The Technical Details