Green Glue Noiseproofing Compound - Carton of 12
What's In The Box?
- 1 carton contains 12 tubes of Green Glue.
- 1 carton will cover 18sqm or 6 sheets of 1.2m by 2.4m plasterboard.
What Are The Benefits?
Green Glue Noiseproofing Compound is a unique visco-elastic damping compound. It is designed to be installed between two sheets of acoustic plasterboard to increase the acoustic performance of a standard stud.
It can also be used retrospectively to existing walls to reduce noise levels coming in the room and leaving out of the room. It is a product which is rapidly growing in popularity with new builds and renovations and is a very cost effective soundproofing solution.
The compounds unique properties act as a damping material to dissipate vibrations caused by sound waves as they travel through walls, ceilings and floors. Green Glue Noiseproofing Compound is a non-hazardous, environmentally-responsible, almost odour free solution that gives you complete peace of mind.
Green Glue Noiseproofing Compound can be used in domestic properties, home cinemas, home studios, DIY and construction projects. It is an easy to use product, you can apply and treat a sheet of plasterboard in under 2 minutes. It is also easy to handle when compared to heavy rolls of Mass Loaded Vinyl.
Green Glue Noiseproofing Compound has an extremely low viscosity making it easy apply with an applicator gun. The low viscosity ensures that when the compound is compressed it spreads to form a complete film of sound isolation.
Green Glue Noiseproofing Compound is used between two sheets of any commonly used building material such as acoustic plasterboard and effectively eliminates up to 90% of noise transfer from one room to the other. Green Glue has had over 7 years of proven use and is highly recommended for new construction, renovation projects and DIY use.
12 tubes of Green Glue will cover 18sqm or 6 sheets of 1.2m by 2.4m plasterboard.
Green Glue works by raising the mass of a structure, this in turn lowers the resonance point, by combining these helps to reduce the levels of vibration that are transmitted into the wall or ceiling. Typical values show that when Green Glue is used in conjunction with steel stud partition you will achieve a 8dB increase in Rw and an Rw-Ctr increase of 9dB over a standard steel stud install.
What Are The Key Features?
Green Glue Noiseproofing Compound has been proven to work in conjunction with the following materials
- Plasterboard - Standard and acoustic plasterboard
- Wood Products - Medium Density Fibreboard (MDF), Oriented Strand Board (OSB), and plywood for applications such as floors, soffits, seating risers in home cinemas, stages and loudspeaker cabinets.
- Insulation - Common building mineral wool or fibreglass works well.
- Mass Loaded Vinyl - MLV and other limp mass products such as our soundproofing mat can be used in conjunction with Green Glue Noiseproofing Compound.
- Steel Stud Walls - Green Glue Noiseproofing Compound performs extremely well with steel stud walls.
Green Glue has been independently tested by Underwriters Laboratories for fire safety and environment impact. UL Environment has validated Green Glue and mould resistant and with no formaldehyde detected.
What Are The Technical Details?
||Green Glue Noiseproofing Compound
||Visco-elastic damping compound
|Quantity Of Tubes
|Area Covered Per Box
||18sqm or 6 Sheets of 1.2m x 2.4m Plasterboard